SailNet Community - View Single Post - Temporary Screw/Bolt Hole Sealant
View Single Post
  #3  
Old 03-10-2013
PorFin's Avatar
PorFin PorFin is offline
Señor Member
 
Join Date: Sep 2007
Posts: 1,340
Thanks: 1
Thanked 8 Times in 8 Posts
Rep Power: 8
PorFin is on a distinguished road
Re: Temporary Screw/Bolt Hole Sealant

Don't inject anything -- instead, buy a roll of aluminum tape (you can find it in the HVAC section of Lowes/Home Depot) and tear off small pieces to cover the holes. Although it has a tenacious adhesive, unlike duct tape, Gorilla tape, or masking tape, the aluminum tape won't leave a sticky mess behind and it cleans off very easily. It weathers very well. I've got a couple of screw holes I covered with it over 18 mos. ago, and the tape's still doing its job like a champ.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
________
'85 BYB Vagabond 39
Reply With Quote Share with Facebook