SailNet Community - View Single Post - oil pressure sender Yanmar 2GM
View Single Post
Old 03-17-2013
boz86's Avatar
boz86 boz86 is offline
Senior Member
Join Date: May 2012
Location: Maryland, US
Posts: 161
Thanks: 7
Thanked 3 Times in 3 Posts
Rep Power: 4
boz86 is on a distinguished road
Re: oil pressure sender Yanmar 2GM

Found the answer so I figured I'd post in case anyone needs to know and searches.

There's a boot that should slid back uncovering a phillips head screw on the sender. My wire's boot had pretty much welded itself to the wire and didn't pull off without breaking the wire ring.

Turns out that part had failed, which is why my alarm wasn't working. So no loss breaking the wire ring/connector.

Thanks to Scott at AR Marine of Annapolis for giving me the answer.
Sailing "Horizons," a Hunter 31, from the Middle Chesapeake around Solomons Island.
I can keep a secret, it's the people I tell who can't.
Reply With Quote Share with Facebook