SailNet Community - View Single Post - M-34 Cutless Bearing Removal
View Single Post
  #2  
Old 03-23-2013
eherlihy's Avatar
eherlihy eherlihy is offline
Learning the HARD way...
 
Join Date: Jan 2007
Location: Boston Area
Posts: 3,325
Thanks: 85
Thanked 50 Times in 49 Posts
Rep Power: 8
eherlihy will become famous soon enough
Re: M-34 Cutless Bearing Removal

I assure you that there are set screws...

Some time ago we had a member (don't remember who) that was sure that there were no set screws holding his cutlass bearing in place... Then he couldn't figure out why the bearing refused to budge after hours trying to dislodge it. Sure enough, he eventually found them and removed the bearing. The trick will be to find them under any paint and/or barnacles that are on the strut.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

USCG Licensed OUPV Captain, ASA 101/103/104/105 Certified Instructor - Also certified in Recreational Marine Electrical Systems


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Getting back onto the water after undergoing knee surgery.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook