SailNet Community - View Single Post - Crealock 37 Wheel to Tiller Conversion
View Single Post
  #10  
Old 03-27-2013
MarcHall MarcHall is offline
Senior Member
 
Join Date: Jun 2006
Location: San Diego
Posts: 109
Thanks: 0
Thanked 3 Times in 3 Posts
Rep Power: 9
MarcHall is on a distinguished road
Re: Crealock 37 Wheel to Tiller Conversion

Just totaled up the costs for the Tiller Conversion

$3807

Includes the conversion kit from Pacific Seacraft
New Kobelt Engine Controls (2042KBW1)
H&L Stock Tiller
Welding of the rudder post extension to the rudder post by Chingon Metal Fabrication
Pulling and reinstalling the rudder by the Hoffman Yacht Maintenance
Installing the bearing provided by Pacific Seacraft by Hoffman Yacht Maintenance
Does not include the haul-out as the bottom needed to painted and the cutlass bearing replaced anyway.

I installed the Kobelt Engine Controls and pulled the pedestal from the boat once the rudder was dropped.

Still need to plug the holes in the cockpit sole from the pedestal and probably some cosmetic fiberglass work on the cockpit sole.

Marc Hall
Crazy Fish, Crealock 37, Hull 207
Crazy Fish - Maintaining, Upgrading and Sailing a Crealock 37
Reply With Quote Share with Facebook