SailNet Community - View Single Post - quick bottom job!??!!-- !!
View Single Post
  #6  
Old 03-29-2013
macwester26 macwester26 is offline
Have a go and DIY .....
 
Join Date: Mar 2013
Posts: 109
Thanks: 13
Thanked 2 Times in 2 Posts
Rep Power: 2
macwester26 is on a distinguished road
Re: quick bottom job!??!!-- !!

You should be able to seal the area by sanding around the filled area and then applying a coat of the same resin used for filling.. applied with a rag / sponge / or thinly with a brush. SEALED...
The very same resin you seal holes with after you have drilled holes through either the hull or the deck.
Applies to G.R.P.

Having said that Marine plywood can be sealed using The West epoxy Resin.

Last edited by macwester26; 03-29-2013 at 05:22 AM.
Reply With Quote Share with Facebook