SailNet Community - View Single Post - That can't be good..... right?
View Single Post
  #7  
Old 04-07-2013
jrd22's Avatar
jrd22 jrd22 is offline
Courtney the Dancer
 
Join Date: Nov 2000
Location: San Juan Islands., WA, USA
Posts: 3,817
Thanks: 3
Thanked 15 Times in 15 Posts
Rep Power: 14
jrd22 will become famous soon enough
Re: That can't be good..... right?

Med- I'd drill a small hole in the bottom of the keel directly under the hinge to see if more water comes out. If it does then there must be a void in that area. You might be able to figure it out by tapping with a small hammer to determine the size and then drill holes and fill with epoxy, at least that's what I've done on rudders that had water in them. Good luck, wet day to be working under the boat.
__________________
John
SV Laurie Anne

1988 Brewer 40 Pilothouse

Reply With Quote Share with Facebook