Re: Wish I Had The Boat Builder/Dealer Do It!
If you're interested in traditional design look at the Puffins.Done in Fe or AL. Made in Netherlands. Was on one that's homeported in New Hampshire. Stout and beautifully crafted. Amazing amount of useable space below. Doing new means you know what systems are going in. Details like the electrical runs are known to you. I did the runs organized by system and in conduit with pop off top covers. Can get to each piece and add more if needs be. My boat is like the old Valiants- everything in it can go through the companionway or out through the cockpit seat hatch above the work space. Replaced the invertor on th the PSC and it wasabitch. There was one turn into the engine space couldn't get anything through as it was a blind 90 degree turn.