SailNet Community - View Single Post - Topside makeover
View Single Post
  #8  
Old 04-19-2013
sailkittiwake sailkittiwake is offline
Member
 
Join Date: Apr 2013
Posts: 32
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
sailkittiwake is on a distinguished road
Re: Topside makeover

Here is a shot of the decals removed. This took me a while to figure out. I found that the best method was to heat the edge so I could rub it up and grab it. Once I had something to pull, I put the heat gun in my other hand, about 3 feet down and then would pull. It was critical to keep the gun and the edge that far apart at all times because if you get too close the tape melts or breaks. Just keep your arms in the same position and walk along.

Untitled
Reply With Quote Share with Facebook