How to prevent from Running/Drying?
Originally Posted by mad_machine
easy off works.. but it takes more than 5 minutes... I remember doing that to a truck we had at a place I worked at. I think we would let it sit half an hour at a time
My boat name is on the transom. Putting a slight excess of EASY OFF, to allow it to sit for extend minutes, resulted in the material to slump and run down off the letters. I could soak a rag in it and adhere the rag over the letters, but I am worried with it sitting that long on the gel coat if that is good for the gel coat.
If you liked my advice/response, give me some rep points. If you didn't......well what do you expect, it was free.