SailNet Community - View Single Post - Using Bottom Paint on Brass Propeller
View Single Post
  #17  
Old 04-24-2013
JimMcGee's Avatar
JimMcGee JimMcGee is offline
Member
 
Join Date: Jun 2005
Location: Barnegat Bay, NJ
Posts: 1,355
Thanks: 19
Thanked 26 Times in 24 Posts
Rep Power: 10
JimMcGee is on a distinguished road
Re: Using Bottom Paint on Brass Propeller

Sheesh MaineSail, thanks for adding one more thing to my spring to-do list.

I've got the prop off right now to do the cutlass bearing. It was painted with Micron after the application of a primer coat, though I'm not sure what primer the yard used.

I'll take the paint off using a brass wire wheel as the old paint is knicked up and check the condition of the prop.

Is it OK to re-coat with a primer-paint combo as Lancelot is doing or better to just use the Petit barrier coat?

Thanks,
Jim
__________________
95 Catalina 30 Island Time

If a man is to be obsessed by something, I suppose a boat is as good as anything, perhaps a bit better than most" - E.B. White

Last edited by JimMcGee; 04-24-2013 at 08:25 AM.
Reply With Quote Share with Facebook