SailNet Community - View Single Post - C&C 30 / Yanmar Repower, Engine Removal
View Single Post
  #10  
Old 05-01-2013
JimsCAL's Avatar
JimsCAL JimsCAL is offline
Senior Member
 
Join Date: May 2007
Location: Glen Cove, NY
Posts: 2,382
Thanks: 1
Thanked 34 Times in 33 Posts
Rep Power: 8
JimsCAL is on a distinguished road
Re: C&C 30 / Yanmar Repower, Engine Removal

I removed the Universal 5411 on my previous boat that way. Definitely attach the main halyard to the boom and not rely on the topping lift. Make sure the block and tackle you use can lower the engine all the way to ground. We were about a foot short which meant some scrambling and rethinking at the end to get it on the ground. I think the entire operation of disconnecting the engine and pulling it out took two of us about 2 hours.
Reply With Quote Share with Facebook