SailNet Community - View Single Post - 3/8 npt to 5/8 barb
View Single Post
  #8  
Old 05-03-2013
Argyle38's Avatar
Argyle38 Argyle38 is offline
Senior Member
 
Join Date: Oct 2010
Location: Connecticut
Posts: 209
Thanks: 9
Thanked 8 Times in 8 Posts
Rep Power: 4
Argyle38 is on a distinguished road
Re: 3/8 npt to 5/8 barb

You are going to want to match the material of the hose barb adapter to whatever the 3/8 npt is mating to. 3/8 is not a typical thread size for bronze hardware so that's why it's hard to find. If it's brass then you can use brass for the application and brass barbs of that size are sold here:

https://www.fisheriessupply.com/midl...machined-brass

Otherwise, you might try Grainger Industrial Supply - MRO Supplies, MRO Equipment, Tools & Solutions They have a good selection of all sorts of fittings.
__________________
S/V Argyle
Downeaster 38 #40

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook