SR Mariner NAV-5A connector
I have an old SR Mariner NAV -5A/10 that has a corroded main wire harness connector. The connector is a 16-pin, female connector which all the sensors connect to the back of the main station computing unit. This is giving me incorrect readings, so I would like to replace it. The manufacturer said they do not have any, so does anyone know where I can get one. The connector is about 3" long and has set-screws to fasten the wires. I don't care if I have to solder the wires to it; I just need one that will slip down on the male pins which are on the PC board.