SailNet Community - View Single Post - Mantus Anchors NEWS: anchor sizing tool
View Single Post
  #2  
Old 05-15-2013
Tim R.'s Avatar
Tim R. Tim R. is offline
Senior Member
 
Join Date: Mar 2003
Location: Portland, Maine
Posts: 1,538
Thanks: 1
Thanked 26 Times in 25 Posts
Rep Power: 12
Tim R. is on a distinguished road
Re: Mantus Anchors NEWS: anchor sizing tool

Thanks Greg although I would make a few suggestions.

1. Your ranges are 35-40, 40-45. You might want to make it 35-39 or 41-45 etc. A 40 ft. boat could be in either range although I would naturally go higher.
2. Less than 20,000lbs and less than 40,000lbs seems like a huge range. My boat is just over 20,000lbs

BTW, I already own a 65lb Mantus as a storm anchor. Great anchor.

And a question. Why not weld the bolts to the anchor? A couple less things to lose and it should not affect the storability of the parts. Or maybe some sort of clevis pin system where the pins can be lashed to the parts.
__________________
Tim R.
Out cruising
1997 Caliber 40LRC

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

-----------------------------------------------------
Reply With Quote Share with Facebook