Re: Prop size for 4-107
Interesting new development since the subject of resizing a prop came up. When I originally looked at the prop it had 16x16 stamped on the outer hub, but the inner hub had a 16x16 stamped but the last 6 was vague. It was still a 6 but it had scratch marks. Wen the subject of resizing came up I went to look again, still hard to make out, so I went to an old survey and there I found that the surveyor indicated a 16x12 prop. I went back the prop and took a wire brush to it and I can now see a faint stamp of 2 over the last six.
So, I am now assuming that the prop is a 16x16 re-sized to a 16x12. Have any idea how that effects things?