Join Date: Oct 2009
Location: Swarthmore, PA
Thanked 102 Times in 91 Posts
Rep Power: 8
Re: Low buck projects- Let's see 'em!
Care to enlighten me on what is funny about trying to complete a DIY project?
I wouldn't call it cheap either, I used good products. I chose this route because I was reading on this board actually about a newer boat with a stainless holding tanks that had corroded. so I figured I'd give it a shot.
I initially saw your caption that mentioned epoxy in the joints, but I did not scroll down far enough to see your reference to 5 coats on all the wood surfaces.
I was mistaken. Sorry about the error. Your design and execution look fine. Good job!
I would go back and delete my error, but you guys have saved it for posterity by quoting it. So there's not much I can do at this point.
Rick S., Swarthmore, PA
USCG Certified Captain, 50 Ton Master and OUPV
ASA Certified 101/103/104/105/106
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
2001 Catalina 34MkII Tall Rig Breakin' Away, Universal Diesel M35B, Mantus 35 lb. anchor, sailing out of Rock Hall Landing Marina