SailNet Community - View Single Post - Very Large Hull Indentation
View Single Post
  #3  
Old 06-06-2013
poopdeckpappy's Avatar
poopdeckpappy poopdeckpappy is offline
Senior Member
 
Join Date: Jul 2006
Location: San Diego
Posts: 5,685
Thanks: 25
Thanked 39 Times in 33 Posts
Rep Power: 10
poopdeckpappy has a spectacular aura about poopdeckpappy has a spectacular aura about
Re: Very Large Hull Indentation

It is very possible that under the extreme weight of water and/or ice, this/these area(s) gave up the ghost and that you may have some delamination in glass layers going on.

you do have several layers, your gel-coat, a matt, a roving, followed by the chopper gun, followed by a roving, then a matt. The worst part is/was the additives added to the resin ( for fast set ) made for some brittle resin batches .

I know that's not what you want to hear
__________________
1978 Tayana 37

Freedom comes when youíre ready to sail away. True freedom comes when you donít have to return


Cut off from the land that bore us, betrayed by the land we find, where the brightest have gone before us and the dullest remain behind, .......but stand to your glasses, steady,.......tis all we have left to prize, raise a cup to the dead already, hurrah for the next that dies
Reply With Quote Share with Facebook