SailNet Community - View Single Post - CDI Furler Halyard is Getting Stuck
View Single Post
  #9  
Old 06-12-2013
Azzarac's Avatar
Azzarac Azzarac is offline
Member
 
Join Date: Sep 2011
Posts: 87
Thanks: 1
Thanked 0 Times in 0 Posts
Rep Power: 3
Azzarac is on a distinguished road
Re: CDI Furler Halyard is Getting Stuck

Caberg, I'm assuming on your 26 you are using the CDI FF2 and are referring to the internal halyard. If so, take a close look at the furler luff. Is there any twist or bend? If so that is where your problem lies. I just replaced mine this spring because it was so distorted from 16 years in the desert sun I could no longer move the carrier through the channel without a hammer and screw driver to assist in the operation. Here you can see the new one compared to the old side by side:
__________________
“If you surrender to the wind, you can ride it.” – Toni Morrison

"Sic gorgiamus allos subjectatos nunc"
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Follow Chameleon's travels at:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook