Join Date: Jun 2013
Thanked 0 Times in 0 Posts
Rep Power: 2
Secondary fuel filter yanmar 3gm30f
I am trying to change the secondary fuel filter on our yanmar 3gm30f in our Beneteau 36cc.
After a couple of days intense planning I finally found a wrench that could loosen the threaded ring.
Then I ran into the problem that I could only pull the bowl/container 1/4 way out. Pretty frustrating to see only 1/4 of the pink filter and fasten the threaded ring without having replaced the filter.
1. How do I pull out the bowl/ container ?
2. Do I need to loosen the screw marked red on the photo ? ( the screw marked yellow is the bleeding screw)
Look forward to tips
Last edited by carlager; 06-19-2013 at 02:36 AM.