SailNet Community - View Single Post - New Generation Anchor on the 37
View Single Post
  #2  
Old 06-26-2013
Pegasus34 Pegasus34 is offline
Junior Member
 
Join Date: Jul 2007
Posts: 25
Thanks: 0
Thanked 2 Times in 2 Posts
Rep Power: 0
Pegasus34 is on a distinguished road
Re: New Generation Anchor on the 37

Dale,
I have a 35 lb Manson on the bow of my PSC 34. I think the bow setup is similar to yours. I drilled a hole through the anchor to hold it in place with a 1/2 inch pin that was already there, but the anchor still rocks from side to side (much more than my old Bruce 33 lb.). To further hold it from rocking I run a bungy cord from the roll hoop to the bow pulpit rail and it works well.
Steve
Reply With Quote Share with Facebook
The Following User Says Thank You to Pegasus34 For This Useful Post:
sailak (06-26-2013)