SailNet Community - View Single Post - Gelkote thickness with Preval sprayer
View Single Post
  #1  
Old 06-27-2013
lancelot9898 lancelot9898 is offline
Senior Member
 
Join Date: Dec 2008
Posts: 675
Thanks: 1
Thanked 3 Times in 3 Posts
Rep Power: 6
lancelot9898 is on a distinguished road
Gelkote thickness with Preval sprayer

I'm concerned that I will not be able to get an adequate thickness when using the preval sprayer. The problem is that the gel that I will be using contains the wax and letting it set up will require that each layer has to be sanded before another coat is applied. I would prefer going to the non wax gel and just use PVA on the final coat, however the gel that I'm interested in has a good color match and is only available with the wax. I've been told that applying spray with a minute or two between passes is possible allowing for build up of the gel. I may be able to make 5 passes this way and get an adequate thickness. Thoughts?
Reply With Quote Share with Facebook