SailNet Community - View Single Post - Anchor Setting Woes
View Single Post
  #54  
Old 06-30-2013
MedSailor's Avatar
MedSailor MedSailor is offline
"Fairhaven" Formosa 41
 
Join Date: Mar 2008
Location: Anacortes PNW
Posts: 1,917
Thanks: 18
Thanked 24 Times in 18 Posts
Rep Power: 7
MedSailor is on a distinguished road
Re: Anchor Setting Woes

Quote:
Originally Posted by Minnewaska View Post
Alright, wiseguy..........
I'm just having a bit of fun, no worries.

The bolts on the mantus are galvanized. You ARE right that the bolts are another potential point of failure and another point to inspect. Personally I feel they are so overbuilt that it's not an issue, but I will have to inspect them once in a while.

What about welds, like on a rocna (the mantus has welded joints too)? Welds can go bad if not done correctly and are "technically" a point of failure too and should probably be inspected. That said, I never really worry about welds except for stainless...

MedSailor
__________________
"True, your boat will outperform mine to windward, but my boat will always outperform yours at anchor." --MedSailor

Last edited by MedSailor; 06-30-2013 at 11:20 AM.
Reply With Quote Share with Facebook