SailNet Community - View Single Post - New Generation Anchor on the 37
View Single Post
  #5  
Old 07-17-2013
Ken PSC37 Atlas Ken PSC37 Atlas is offline
International Bum
 
Join Date: May 2013
Location: Montreal
Posts: 18
Thanks: 9
Thanked 0 Times in 0 Posts
Rep Power: 0
Ken PSC37 Atlas is on a distinguished road
Send a message via Skype™ to Ken PSC37 Atlas
Re: New Generation Anchor on the 37

I just added a Mantus 30kg to my PSC37. It is one size up from the recommendation, but after the first night you have anchor problems a little overkill usually sounds good. I attached some pictures. The one thing I liked about the Mantus was the ability to take it apart and store it if needed. (Maybe used as a storm anchor) However, the picture of it on the bow roller shows it fits OK. You can't see it, but on the other roller the original anchor on my boat is still there, a 35# CQR. It is a little tight with both, but I think I would probably take the CQR off before the mantus. I don't have much experience using it yet, but will let you know how it holds.
Attached Images
File Type: jpeg Mantus1.jpeg (96.9 KB, 63 views)
File Type: jpg Mantus2.jpg (31.5 KB, 54 views)
File Type: jpg Mantus3.jpg (42.2 KB, 74 views)
__________________
SV Atlas
1989 PCS 37 Hull #206

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Home Port: Rockland Maine

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook