SailNet Community - View Single Post - Halyard installed backwards
View Single Post
  #2  
Old 07-18-2013
CalebD's Avatar
CalebD CalebD is offline
Tartan 27' owner
 
Join Date: Jan 2008
Location: NYC
Posts: 4,617
Thanks: 4
Thanked 93 Times in 85 Posts
Rep Power: 7
CalebD will become famous soon enough
Re: Halyard installed backwards

There is the old bent paper clip trick; bend it so it is shaped like an "S". Hook & tape it to each piece of line.
I don't mind using a little sewing for this though. A few stitches securely attaches the two lines together with no tape build up.
Yes, get some line slightly smaller that you can later use for a spinnaker sheet or whatever. Just make sure it is long enough to double the height of the mast.
__________________
"The cure for anything is salt water~ sweat, tears, or the sea." ~Isak Denesen

Everybody has one:

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote Share with Facebook