SailNet Community - View Single Post - How to connect a Standard Horizon GX2100 AIS VHF to a Raymarine RL-70C plotter
View Single Post
  #6  
Old 07-21-2013
joevar joevar is offline
Junior Member
 
Join Date: Jul 2000
Location: City Island, NY
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
joevar is on a distinguished road
Re: How to connect a Standard Horizon GX2100 AIS VHF to a Raymarine RL-70C plotter

The RL-70 outputs
NMEA Data output on Blue
NMEA ground on White

The Standard Horizon GX-2000
NMEA In + is Blue
NMEA Common - is Green
NMEA Out + is Gray
NMEA HS In + is Brown

I connected RL-70 Blue to Standard Horizon (SH) Blue and maintained that connection.

I then connected RL-70 White to SH Green with and without the resistors. Worked for 10 seconds then stopped

I then disconnected Green and connected RL-70 White to SH Brown with and without the resistors.
Worked for 10 seconds then stopped
Reply With Quote Share with Facebook