Join Date: Jul 2013
Thanked 0 Times in 0 Posts
Rep Power: 0
Re: A C&C 30 mk2 with 6'6" draft?
There is a double turning block between the two aft winches, possibly 6 inches from the rail on both sides which we assumed would be for a spinnaker. We tried it with the jib sheet and it seemed to have a more direct line from the jib car to the aft self tailing winch. Is this turning block intended to be used with the jib sheet? We previously had a G&S 30ft Custom which was pretty much a racing platform with few ceature comforts so it is interesting discovering how this boat works which is focused on comfort as well.
I will try to find a picture if that would help.
Thanks for any help.