SailNet Community - View Single Post - Nipper Dinghy Rigging Help/Advice Needed
View Single Post
post #1 of Old 08-10-2013 Thread Starter
Junior Member
Join Date: Aug 2013
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
Nipper Dinghy Rigging Help/Advice Needed


We have acquired a Nipper dinghy that was left to us but we're not totally sure how the rigging works. Please see attached pictures for the set up.

It has a short aluminium mast that is permanently fixed with a pulley wheel in the top. It also has a longer wooden mast that you can see fixed to the aluminium mast near its base, a little above the boom. Our issue is firstly how do we go about raising and then fixing the wooden mast in place? Following that how do we go about hoisting the sail up the mast or should it be put in place before the wooden mast is raised?

The wooden mast has a bracket part way up that is shown in close up.

Any help or guidance is much appreciated.

Attached Images
File Type: jpg image.jpg (52.5 KB, 16 views)
leontids is offline  
Quote Share with Facebook
For the best viewing experience please update your browser to Google Chrome