Join Date: May 2005
Thanked 40 Times in 39 Posts
Rep Power: 13
Re: Jeanneau Attalia
I've an Attalia (from 1984) with VP2002 (18hp) and a two bladed fixed propeller marked 84K11. I'm thinking about change to a folding propeller, but I don't know which size will be the best one.
Have anyone had the same (brand) propeller that I have? If so is, do you know what type of shaft it is? Straight or cone formed? If cone formed - how cone formed, 1:10, 1:20 or another dimension? (The boat is in the water for the moment, so I can't take the prop away at the moment. Would like to take her up first when I have the new prop.)
Have anyone, who has the same engine as I, changed to a folding propeller? What is a good size of a folding propeller, according to the engine and the boat?
Not sure if you are still looking here, but found the original prop from my Arcadia, it is a 360x180mm or 14x7 rh with a 22mm shaft. The previous owner put a 14" max prop. But the shaft was switched out to a 7/8".
Not sure what this does for folks.......
She drives me boat,
I drives me dinghy!