SailNet Community - View Single Post - Flexifold and strut
View Single Post
post #2 of Old 08-15-2013
I don't discuss my member
Fstbttms's Avatar
Join Date: Feb 2003
Location: Under a boat, in a marina, in the San Francisco Bay
Posts: 2,420
Thanks: 13
Thanked 44 Times in 41 Posts
Rep Power: 15
Re: Flexifold and strut

1.- Remove the zinc.
2.- Remove the cover plate.
3.- Remove the set-screws that secure each blade pivot pin.
4.- Drive out the pivot pins.
5.- Remove the blades.
6.- Remove prop nut set screw
7.- Back the prop nut off but do not remove.
8.- Put a deep socket on the nut, then attach prop puller.
9.- Remove prop.

Last edited by Fstbttms; 08-15-2013 at 12:35 AM.
Fstbttms is online now  
Quote Share with Facebook
The Following User Says Thank You to Fstbttms For This Useful Post:
davidpm (08-16-2013)
For the best viewing experience please update your browser to Google Chrome