SailNet Community - View Single Post - Replacing engine mounts
View Single Post
Old 08-27-2013
YankeePSC34 YankeePSC34 is offline
Junior Member
Join Date: Feb 2009
Location: Liveaboard SV Yankee
Posts: 21
Thanks: 5
Thanked 2 Times in 2 Posts
Rep Power: 0
YankeePSC34 is on a distinguished road
Re: Replacing engine mounts

I believe I removed the originally installed mounts. The engine has run only 600 hours. I could still read the 100 on the starboard and 150 on the port mounts. The front mounts were very rusty. I don't see a good reason to come up with 3 x 200 and 1 x 150 setup other than jerry rigging.
Reply With Quote Share with Facebook