SailNet Community - View Single Post - Cakiber 28 baby stay
View Single Post
  #2  
Old 09-10-2013
Faster's Avatar
Faster Faster is offline
Just another Moderator
 
Join Date: Sep 2005
Location: New Westminster, BC
Posts: 14,915
Thanks: 74
Thanked 214 Times in 206 Posts
Rep Power: 10
Faster has a spectacular aura about Faster has a spectacular aura about Faster has a spectacular aura about
Re: Cakiber 28 baby stay

Fixed babystays on such rigs are usually there to prevent mast pumping - in lieu of double lower shrouds (fore and aft). Doubtful that boat has a 'spindly' rig, but you might like the stability the stay provides for the mast, esp in bumpy conditions.

The real pain is when jibing an end-for-end pole, and many users rig a quick-disconnect/tensioner to remove the stay downwind.

The other pain is how it impedes tacking a genoa as it 'drags' across and around the babystay. What REALLY helps here is a 3-4 foot piece of 2" PVC or ABS pipe around the bottom of the stay.. this helps the sail 'slide/roll' by the baby stay and it's much less likely to cause a hangup. I think the black plastic pipe is less visible and therefore better to use. You can also buy 'shroud rollers' but the pipe is cheaper and works better.
__________________
Ron

1984 Fast/Nicholson 345 "FastForward"

".. there is much you could do at sea with common sense.. and very little you could do without it.."
Capt G E Ericson (from "The Cruel Sea" by Nicholas Monsarrat)
Reply With Quote Share with Facebook