Join Date: Jan 2003
Location: Maine Coast
Thanked 301 Times in 233 Posts
Rep Power: 18
Re: Embedded Chain plate maint/replacement
There is a heavy glass strip at the bottom of the plates, this folds horizontal over where the coring obviously starts (as well as the gel coat).
At the top there is a gel coat cover strip, up under that looks like this.
Those screws are bunged toe rail/cap rail, stanchion bases etc, going through the bases, teak, and folded 'shoebox' lips of the deck/hull.
While you're in there you may want to add some through bolts to the hull/deck joint as opposed to just screw & glue....
-Maine Sail / CS-36T
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
© Images In Posts Property of Compass Marine Inc.