Join Date: Mar 2010
Location: San Francisco bay
Thanked 1 Time in 1 Post
Rep Power: 7
Re: Cored deck soft spot repair
I have just started addressing the soft spot in the back of my cockpit today. Probably water ingress from the rudder post.
I was going to do it from the top but decided to go from the bottom after I realized that my fiberglass is much thicker on the top than on the bottom. On my boat the bottom is a mere skin while the top is much thicker. I feel that cutting through that layer is much safer.
Something to consider
Last edited by flo617; 10-28-2013 at 11:38 AM.