SailNet Community - View Single Post - Raymarine Linear Actuator Type 2S
View Single Post
  #4  
Old 10-29-2013
CaptainDan99 CaptainDan99 is offline
Member
 
Join Date: Jan 2010
Location: Colorado
Posts: 77
Thanks: 0
Thanked 3 Times in 1 Post
Rep Power: 5
CaptainDan99 is on a distinguished road
Re: Raymarine Linear Actuator Type 2S

DRIVED STOPPED is telling you that the computer can no longer move the drive. It can be a problem in the drive, steering, or computer.

It is sometimes caused by carbon build up in the drive motor especially in motors that have seen a lot of use. Faults in the computer can cause the same message.

Drive limit is in the setup program. The limit is based on the position of the rudder reference and when set properly will stop the drive from extending or contracting fully.
Reply With Quote Share with Facebook