SailNet Community - View Single Post - Yanmar 2GMF, throttle return spring too strong
View Single Post
Old 10-30-2013
redline's Avatar
redline redline is offline
Senior Member
Join Date: Feb 2010
Posts: 189
Thanks: 1
Thanked 9 Times in 8 Posts
Rep Power: 6
redline is on a distinguished road
Re: Yanmar 2GMF, throttle return spring too strong

If adding a clamp on the cable as pictured above (or the Teleflex version), it's best to put it as close as possible to the control lever end of the cable. If the cable length is significant and/or has several bends, it will add "sponginess" if the clamp is at the engine end.

Also, it shouldn't be too tight - ideally the return spring should throttle the engine back to idle if the control cable somehow let go.
s/y "Redline"
1998 Jeanneau SO45.2
Reply With Quote Share with Facebook