SailNet Community - View Single Post - should I replace my standing rigging myself
View Single Post
  #5  
Old 11-12-2013
Irunbird's Avatar
Irunbird Irunbird is online now
Senior Member
 
Join Date: Aug 2008
Location: Charleston, SC
Posts: 289
Thanks: 6
Thanked 3 Times in 2 Posts
Rep Power: 7
Irunbird is on a distinguished road
Re: should I replace my standing rigging myself

Another option would be to use Dynex-Dux (or the NE ropes equivalent using sk-75). I made my backstay out of the stuff and I know you can get emergency shroud kits of the same (via Coligo marine, I think). You'd just have to splice in some thimbles and you'd save on the cable and all swaged fittings (the fittings are actually the most expensive). Just an idea...

Edit- double ck the price-- the more I look at the cost of cable, wire might be cheaper (although the fittings will cost quite a bit more if you have to replace those.

Last edited by Irunbird; 11-12-2013 at 12:24 PM.
Reply With Quote Share with Facebook