SailNet Community - View Single Post - Replace Panel vs. Replace Switches
View Single Post
  #1  
Old 11-17-2013
geronimo69 geronimo69 is offline
Junior Member
 
Join Date: Jul 2013
Location: Long Island, NY
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
geronimo69 is on a distinguished road
Replace Panel vs. Replace Switches

I recently replaced the anchor light. Going out to the boat this week, I checked on the light to make sure all was good. After turning on the master, then the anchor, I saw it wasn't working. So I checked on some other electrical items. Nothing working. I unscrewed the panel and noticed that the wires were coming out of the switches and the switch to the anchor light was separated inside. Now I know why the master indicator didn't work either, the wire wasn't connected (old). So after examining my options, looks like all the connections need to be redone and a few if not all the switches need to be replaced.

Should I just replace the entire panel or do switch by switch? If the panel route, where is a good place to get a replacement panel?

This is a Catalina 27' (1981). Any help would be appreciated.
Reply With Quote Share with Facebook