Join Date: Mar 2006
Location: New England
Thanked 18 Times in 14 Posts
Rep Power: 15
I would "pot" the holes with epoxy, after drilling them oversized... you really don't want to let water get a toehold into the core on your cabintop. Use silica filled epoxy, and then re-drill after it is dry. Why do a job half-assed... when it only takes a bit more time and effort to do it right...and prevent an expensive repair later.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.