SailNet Community - View Single Post - Head Problems
Thread: Head Problems
View Single Post
  #4  
Old 02-19-2002
Peter_pan Peter_pan is offline
Member
 
Join Date: Feb 2002
Posts: 57
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 13
Peter_pan is on a distinguished road
Head Problems

if it is still in the boat. reinstall the head bolts and leave a few turns loose. start the engine and let it run. a couple of gooses will blow the head loose. someone probably used permatex for a gasket sealer. do not use it when you replace the gasket. use copper spray paint instead. good luck
Jim
Reply With Quote Share with Facebook