SailNet Community - View Single Post - Using Assymetric Spinnaker from old boat
Thread: Using Assymetric Spinnaker from old boat
View Single Post
  #2 (permalink)  
Old 02-23-2002
Jeff_H's Avatar
Jeff_H Jeff_H is offline
Super Moderator
  
Join Date: Feb 2000
Location: Annapolis, Md
Posts: 5,388
Rep Power: 13
Jeff_H has a spectacular aura about Jeff_H has a spectacular aura about
Using Assymetric Spinnaker from old boat
The first 36.7 looks like a really nice boat. I think you should enjoy it. You may luck out and be able to use the chute for messing around, since the 281 had a mast hear rig and the 36.7 is a fractional rig, but more likely than not the 281 assym will be too small to fly properly. I would contact Beneteau and find out what is the ''J'' (hoist) measurement on the 36.7. The 281 has a ''J'' of 33''4.

Jeff
Reply With Quote Share with Facebook