SailNet Community - View Single Post - interior-oak strips
View Single Post
  #3  
Old 02-27-2002
Bobola Bobola is offline
Junior Member
 
Join Date: Feb 2002
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
Bobola is on a distinguished road
interior-oak strips

A cheap fix would be to buy round, plastic, adhesive backed tabs from Home Depot and slap them on.

The proper fix would be to back a screw out, counter sink the hole slightly, carefully epoxy an oak plug on the screw head (lining up the grain) and the next day carefully shave the excessive off, low side to high side, with a very sharp chisel.

I''ve done that on old teak decks and it works fairly well, but it''s labor intensive.

Bob......
Reply With Quote Share with Facebook