SailNet Community - View Single Post - Replacing crazed lexan hatches - updated question
View Single Post
post #4 of Old 03-16-2007
Bill Mc
Coastal Cruiser
Bill Mc's Avatar
Join Date: Apr 2006
Location: Hamlet, North Carolina
Posts: 147
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 12
Most ports are convex and not flat, this is done to facilitate the shedding of water particularly on the deck skylights. Boatlife caulk should be used to bed the new Lexan. To remove the lexan utilize a piece of music wire and manipulate it thru the old caulk and with a pair of vise grips on each end of the wire you and an accomplice can use a sawing motion to remove the old port.

Fair Winds,


Last edited by Bill Mc; 03-16-2007 at 08:25 AM.
Bill Mc is offline  
Quote Share with Facebook
For the best viewing experience please update your browser to Google Chrome