SailNet Community - View Single Post - Irwin 28 head help
View Single Post
  #6  
Old 01-18-2014
chuck53 chuck53 is offline
Senior Member
 
Join Date: Oct 2009
Location: Virginia
Posts: 1,090
Thanks: 3
Thanked 16 Times in 16 Posts
Rep Power: 6
chuck53 is on a distinguished road
Re: Irwin 28 head help

Since your boat did at one time have a head and holding tank, there has to be tell tale signs of where the holding tank was located. Fittings that held the tank in place...holes thru bulkheads where hoses were run, either forward under the V berth or aft under the settee...deck fittings for pump out....a hole in the side of the boat where a vent hose was connected or in the case of some boats like mine, my vent hose is connected to one of the hollow stanchions with a hole in the top of the sanction that is the vent. Where is the largest spot a holding tank will easily fit into?
There are only a few places that it will fit...I doubt it is in the cabinet you mentioned...I'm betting it is under the settee.
__________________
Catalina 34
Reply With Quote Share with Facebook