SailNet Community - View Single Post - Rebedding Sail tracks
View Single Post
  #3  
Old 04-07-2007
camaraderie's Avatar
camaraderie camaraderie is offline
moderate?
 
Join Date: May 2002
Location: East Coast
Posts: 13,877
Thanks: 0
Thanked 3 Times in 3 Posts
Rep Power: 15
camaraderie is a jewel in the rough camaraderie is a jewel in the rough camaraderie is a jewel in the rough
Scott...I've done it several time but claim no particular expertise. Any leaks will come at the fasteners so it is important to bed them well and not tighten fully until the compound has fully set up or else you just squeeze it out of where it belongs. I used silicone on my fasteners and after loading up the holes and making sure the uppr threads of the bolts are well coated...I tighten down on the nuts just past finger tight...then wait for 24 hours to tighten fully so I have a nice rubber gasket under pressure for sealing. Hope that helps and no one tells me I've done it completely wrong. Worked for me!
Reply With Quote Share with Facebook