SailNet Community - View Single Post - Is it useless: NMEA2000 In-line terminator
View Single Post
  #5  
Old 01-29-2014
Reefpoints Reefpoints is offline
Member
 
Join Date: Sep 2011
Location: Maryland
Posts: 83
Thanks: 6
Thanked 1 Time in 1 Post
Rep Power: 3
Reefpoints is on a distinguished road
Re: Is it useless: NMEA2000 In-line terminator

Quote:
Originally Posted by Tim R. View Post
There should be a resistance of 60 ohms. Try testing between the pins at the end where the wind sensor connects.

Have you tested an end terminator. Which pins provide the specified resistance?
Thank you! You pointed me in the right direction.

Across the network connections pin 4 (data hi) and pin 5 (data lo) in the diagram below there is a resistance of approx 120 ohms in both the end terminator and the in-line terminal.



Now that I can see that it's doing something, it'll get installed. What's one more hole drilled into my mast anyway..
Reply With Quote Share with Facebook