One of the better ways to mount a float switch is to mount it to a long, skinny vertical board or piece of PVC pipe. Then you can use screws or other methods to mount the board or pipe in a location that positions the float switch where it needs to be. The bilge pump should be mounted to the same board/pipe. That way, if you need to service it, you can just pull it up and work on it.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.