I believe the water intake was left off the drawing to simplify it... and not confuse the novice boat plumbers...
This setup with the modifications I've indicated is designed to allow flushing into the holding tank or directly overboard, as well as pumping out the tank via the pump used to flush the Lavac head, or via a deck pumpout fitting. It is also designed to only require one pumpout fitting or connection on the holding tank.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.