The only precaution I would give you is to make sure that the Y-valve leg that leads from the holding tank to the Whale gusher pump is pointed down towards the holding tank, not towards the Gusher pump as you have in the drawing, and that it is mounted slightly higher than the PVC Y. That way, the sewage will drain from the valve back into the holding tank, rather than sitting in the valve and hose and causing a stench.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.