SailNet Community - View Single Post - Rebedding Sail tracks
View Single Post
  #12  
Old 05-09-2007
Gary M's Avatar
Gary M Gary M is offline
Senior Member
 
Join Date: May 2006
Location: Sarnia ON
Posts: 660
Thanks: 2
Thanked 2 Times in 2 Posts
Rep Power: 9
Gary M is on a distinguished road
You might be able to cut the nut off with a mini grinder or a dremel. Alternately if you are carful you could likely drill the head off the bolt so that it would fall through.
If you do cut the bulkhead be sure to reseal the edge with epoxy, I had to replace a bulkhead due to water running into the top edge.

Gary
Reply With Quote Share with Facebook