Join Date: Mar 2006
Location: New England
Thanked 17 Times in 13 Posts
Rep Power: 15
It would help if you said what kind of boat it was, as well as posted a photo of the problem.
My boat has clamps built into the spreader ends to secure the spreader tip on the shroud. Basically, it is a piece of metal with a screw through it... tighten down on the screw... clamps the shroud in place. You could probably do something similar with your spreader tips.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.